Li Polymer Charging Tips. Charging lithium iron phosphate 3.2 volt cells is identical, but the constant voltage phase is limited to 3.65 volts. “c” value refers to the discharge capacity of your lipo battery and is stated by the lipo battery manufacturing companies.
Charge and discharge currents should be kept to a minimum. Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher. Make sure you are using the correct charge termination method.
The Rule Is To Keep Your Battery Life Somewhere Between 40% And 80% At All Time.
It may increase to some extent, but the charger is set to 4.2v voltage charging of lipo battery. Make sure you are using the correct charge termination method. Put lipos in plastic zip top storage bags and place them in the fridge when not in use.
Heat Is Generated When The Chemicals Inside The Battery Cell Are Charging Or Discharging.
“burst c” is the indication of the maximum “c” value for a short time. Reverse charging can lead to cell damage or a fire. The top 5 things that hurt run time, power, and life.
You Can Calculate Maximum Discharge Capacity In Ampere.
Secondly, a lipo battery should always be charged and stored in a lipo bunker. Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher. This leaves the battery unable to charge at all.
Ensure That Charging Leads Are Connected Correctly.
As we mentioned before, you must use a proper lithium ion/polymer battery charger. An battery left unattended while charging can easily overcharge and catch fire. Make sure you don’t charge to 100%.
Never Charge Inside An Automobile Even When Parked.
Always charge lipo batteries on surfaces that won’t catch on fire such as cement, steel, ceramic or stone. The lithium ion battery is easy to charge. Don’t charge the battery with nicd or nimh charger and not charge more than 4.2v.